37
38
7. Under the Backup set, you can see the setup options below after pressing Enter:
You can setup the charge power ratio and stop SOC of battery. If back up was set up.
Battery will be charged first to keep the capacity. When back up keeps more than 3
days, system will give a warning to disable this function. If customer forgot to stop it.
This function will stop automatically in one week.
8. Under the default set, you can see the setup options below after pressing Enter:
Default set is “resume to default setting ”, please don't use it unless it's necessary.
6.4 Communication
6.4.1 Use of USB-A port
USB-A port is mainly for firmware update and monitor. Through USB connection, we
can quickly update the software of machine or using shine-WiFi-X(RF or GPRS also
ok) to monitor the system. You can see USB-A as below:
Default Set
WorkMode
WorkMode
YES
Press
“
enter
”
key to make
sure
Press
“
enter
”
key more
than 3 seconds to make sure
Back up
WorkMode
Enable?
Disable?
WorkMode
Enable
WorkMode
Charge ratio: ?%
WorkMode
SAVE:Yes?
WorkMode
No?
