44
43
8. Under the Country/Area setting, you can change the safety options of SPA after
pressing Enter:
VDE0126
…
EN50438
WorkMode
VDE0126
…
Chile
WorkMode
AS4777
…
AU_sa_network
WorkMode
Europe Area
General Area
Australia Area
CEI 0-21
CEI 0-16
WorkMode
Italy Area
…
Country/Area
WorkMode
WorkMode
SC : _ _ _ _
If you need to change safety
options , you need key password
Chart 6.13
Note:
Ÿ
Default safety regulations are set at the factory.
Ÿ
Determine the region according to the factory's safety regulations, LCD can only set
the corresponding region's safety regulations.
9. Under the Dry Connect setting, you can control the working hours of external water
heaters, diesel generators and other equipment by setting SPA after pressing Enter:
Heater
WorkMode
WorkMode
D-Time
WorkMode
00:00
–
00:00
WorkMode
Export P: 0000W
WorkMode
00:00
–
00:00
WorkMode
Export P: 0000 W
D-Time
D-Export Power
WorkMode
D-Time
WorkMode
00:00
–
00:00
D-time
WorkMode
Min.Soc 00%
D-Bat
WorkMode
OnDelay: 00min
WorkMode
MinRun: 000 min
WorkMode
OnDelay: 00min
WorkMode
MinRun: 000 min
WorkMode
Heater: OK
WorkMode
Generator : OK
WorkMode
TurnOff P: 000W
WorkMode
TurnOff P: 000W
D-Mix
WorkMode
Dry Connect
Generator
Disable
NO
D-Export Power
D-Mix
Save
：
OK
NO
NO
D-Bat
Save
：
OK
NO
Min.Vbat 00.0V
D-Time: trigger by time
D-Export Power: trigger by output power
D-Mix: trigger by time and output power
Note:
Ÿ
The D-Bat setting item in the generator option will display different parameters
according to the type of battery connected. Min.SOC will displayed when a lithium
battery is connected, and Min.Vbat when a lead-acid battery is connected.
Chart 6.14
Chart 6.15
10.Under the default set, you can see the setup options below after pressing Enter:
Default set is “resume to default setting ”, please don't use it unless it's necessary.
6.5 Communication
6.5.1 Use of USB-A port
USB-A port is mainly for firmware update. Through USB connection, we can quickly
update the software of machine. You can see USB-A as below:
Note:
USB is only used for firmware update. Customer can't use it for charging.
Chart 6.16
Default Set
WorkMode
WorkMode
YES
Press
“
enter
”
key to
make sure
Press
“
enter
”
key more
than 3 seconds to make sure
