17
18
Step 3: Push threaded sleeve on to connection terminal until both are locked tightly.
Step 4:Plug the socket into AC output terminal until it is locked. Use a flat-blade
screwdriver to hold the buckle and pull out the AC terminal.
Step 5: Plug the AC terminal into the inverter AC port.
Chart 5.15
Chart 5.16
Chart 5.17
Chart 5.18
Chart 5.19
Chart 5.20
The recommended wiring diagram is as follows:
Note:
This diagram is an example for gird system without special requirement on electrical
wiring connection.The neutral line is necessary
.
Note:
This diagram is an example for Australian and New Zealand gird system where neutral
line can't be switched.The neutral line is necessary
.
SPA
SPA
