Cross Technologies 2416-x02 Instruction Manual Download

Page: 1 / 24

Instruction Manual

Model 2416-x02

Multi Channel Downconverter

2416-402 Four Channel • 2416-302 Three Channel • 2416-202 Two Channel • 2416-102 One Channel

May 2014, Rev. B

MENU

EXECUTE

MODEL 2416

ROSS

ECHNOLOGIES INC.

DOWNCONVERTER

REMOTE POWER

ALARMS

1674.125 1926.250
1926.375 2086.625

------ CH 1 -------- ------ CH 2 --------

------ CH 3 -------- ------ CH 4 --------

(Shown, Model 2416-402 - Four Channel, Front Panel)

Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,

but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.

for purposes of operating the equipment.

When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number,
equipment serial number, and a description of the part.

ROSS

ECHNOLOGIES, INC.

6170 Shiloh Road

Alpharetta, Georgia 30005

(770) 886-8005

FAX (770) 886-7964

Toll Free 888-900-5588

WEB www.crosstechnologies.com

E-MAIL [email protected]

Summary of Contents for 2416-x02

























Search results

Summary of Contents for 2416-x02

Reviews:

Related manuals for 2416-x02

Brands by name

Popular brands

Cross Technologies 2416-x02, Instruction Manual

Search results

Summary of Contents for 2416-x02

Reviews:

Related manuals for 2416-x02

Brands by name

Popular brands