Grouw! 89085, Instruction Manual

Page: 44 / 123

44
POSTHOLE DIGGER WITH PETROL ENGINE
Introduction
To get the most out of your new posthole
digger, please read through these
instructions before use. Please also save the
instructions in case you need to refer to them
at a later date.
Technical data
Engine: 2-stroke 52 cm
3
with recoil starter
Output: 1.4 kW (1.9 hp)
Idling speed: 2700-3400 rpm
Tank capacity: 0.85 l
Fuel: oil/lead-free petrol mixture, 40:1 (2.5%)
(mix 25 ml 2-stroke oil and 1 litre unleaded
petrol)
Drill diameter:
150 mm
Drill engages at over 4300 rpm
Recoil start with Easy Start
Sound pressure, L
pA
: 103.80 dB(A),
K
pA
: 3 dB(A)
Sound output, L
WA
Sound output, L Sound output, L : 107.54 dB(A), K
WA
: 3 dB(A)
Vibration (left): 12.386 m/s
2
, K 1.5 m/s
2
Vibration (right): 12.469 m/s 2 , K 1.5 m/s 2
About the vibration value
The table shows how long you may be
exposed to vibration every day, if the
vibration load of 2.5 m/s
2
is not to be
exceeded:
Vibration Maximum time
2.5 m/s
2
8 hours
3.5 m/s
2
4 hours
5.0 m/s
2
2 hours
7.0 m/s
2
1 hour
10.0 m/s
2
30 minutes
Special safety requirements
Safety directions for using the machine
Always be sure to wear appropriate personal
protective equipment when working with
the machine.
Sturdy protective gloves can reduce
vibrations in your hands. Take regular breaks
when working with the machine.
Do not exceed the maximum number of
hours of use per day as shown in the table on
vibration.
Persons under 18 years of age may not use
the machine.
The user must have read the instructions
prior to use, be thoroughly instructed in the
use of the machine and be knowledgeable
about the risks that may occur through use
of the machine.
To ensure the user’s safety, only use original
spare parts to repair and maintain the
machine.