background image

24

Warranty

Contact Us

Improvements

Grouser Products Inc. is continually striving to improve its products.  We reserve the right to change 
prices, specification, or equipment at any time without notice.  We also reserve the right to make 
improvements or changes when it becomes practical and possible to do so without incurring any 
obligation to make changes or additions to the equipment sold previously.

As always, if you have any questions about your 770 Dozer or other products made by Grouser, feel 

free to contact us.

Grouser Products

755 2nd Ave NW - West Fargo, ND  58078

Phone: 

1-800-747-6182

Fax:

  1-701-282-8131

E-mail: 

 [email protected]

Website:

  www.grouser.com

 

Grouser Products warrants to the original purchaser of each item that the product be free from 

defects in material and workmanship under normal use and service for a period of two years from date 
of original retail delivery. If such equipment is found to be defective within two years, it is the obligation of 
Grouser Products under this warranty to repair or replace (exclusive of the cost of labor and transportation), 
any equipment or parts, in the judgment of Grouser Products to be defective in material or workmanship.  
 

All equipment or parts claimed to be defective in material or workmanship must be made available 

for inspection at the place of business of a dealer authorized to handle the equipment covered by this 
warranty, or, upon request by Grouser Products, shipped to the Grouser Products factory in West Fargo, 
North Dakota. Grouser Products shall have no obligation to bear the cost of labor or transportation in 
connection with replacement or repair of any such defective parts in the setup process.
 

This warranty covers only defects in material and workmanship. It does not cover depreciation 

or  damage  caused  by  normal  wear,  accident,  improper  assembly,  improper  adjustments,  improper 
maintenance including lack of proper lubrication, or improper use. Therefore, Grouser Products liability 
under this warranty shall not be effective or actionable unless the equipment is assembled, maintained and 
operated in accordance with the operating instructions accompanying the equipment. Grouser Products 
shall have no liability if the equipment has been altered or reworked without the written authorization of 
Grouser Products.
 

Grouser Products’ parts, which are furnished under this warranty and properly installed, shall be 

warranted to the same extent as the original parts under this warranty if, and only if, such parts are found 
to be defective within the original warranty period covering the original equipment.

Summary of Contents for Ag Pro Plus

























Reviews: