© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Basic Installation/Operation
70421501 (EN)
28
UniLinc Control
RU Control Suffix
1. Press the (
←
) or (
→
) keypad to change cycles. The
center highlighted position is the selected cycle.
To customize a cycle, refer to the
Programming
Manual
.
2. Press Start
to start selected cycle.
IMPORTANT: If the loading door or lint panel
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the Start
pad must be pressed.
3. When the cycle is complete, open door and
remove laundry.
NOTE: This machine includes an anti-wrinkle/
extended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat
every few minutes. The intermittent tumbling will
continue for one hour or until the door is opened.
After an hour the machine enters delayed tumble
and will tumble for two minutes every hour for up
to 18 hours or until the door is opened.
Figure 21
TMB1276C
TMB1276C
www.groupdynamics-laundry.com
