© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Basic Installation/Operation
27
70421501 (EN)
LED OPL Control
RE Control Suffix
1. Press the Up (
↑
) or Down (
↓
) keypad to change
cycles.
To customize a cycle, refer to the
Programming
Manual
.
2. Press Start (
) to start selected cycle.
IMPORTANT: If the loading door or lint panel
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the
Start (
) pad must be pressed.
3. When the cycle is complete, open door and
remove laundry.
NOTE: This machine includes an anti-wrinkle/
extended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat
every few minutes. The intermittent tumbling will
continue for one hour or until the door is opened.
After an hour the machine enters delayed tumble
and will tumble for two minutes every hour for up
to 18 hours or until the door is opened.
Figure 20
TMB1345R
PROGRAM REVERSING ENERGY
SAVER
HEATING
START
STOP
BACK
PROGRAM REVERSING ENERGY
SAVER
HEATING
STOP
START
BACK
TMB1346R
PROGRAM REVERSING ENERGY
SAVER
HEATING
STOP
BACK
TMB1371R
START
S MODELS
H MODELS
U MODELS
TMB1346R
TMB1371R
TMB1345R
START
STOP
BACK
Y MODELS
TMB2370N
www.groupdynamics-laundry.com
