Toughsat
Users Manual
Ground Control
- 31 -
Unable To Access Network
– Check IP Settings
If your network settings of the router (which is integrated into the controller) have been accidentally changed, the dish will
not be able to communicate with the router.
Check the modem IP and default gateway. The Modem IP should match what is listed at the beginning of this document,
or on your CUSTOMER INFORMATION SHEET which has your IP settings for your system. The default gateway should
be 192.168.1.1, with a default DNS of 192.168.1.1.
If the IP settings were wrong, change them. Then click on “Save Settings”
Check the Default Gateway Address; it should be the same as the modem IP at the beginning of this document.
The Internet IP address will normally be one digit up from the gateway IP address.
Correct these settings, and click “save settings at the bottom”
Attempt to browse again. If you cannot get online, please call technical support.
