E
thernet
P
anel
Hardware EthernetPanel
© 2010 by Grossenbacher Systeme AG DVS 48961 V3.0
9
2 Introduction
Grossenbacher Systeme AG starts the openAutomation concept with the
EthernetPanel
devices. They are based on a 266MHz-x86-CPU with
WindowsCE and Ethernet-on-board.
In the basic configuration the device can be used as „
HMI
“ or as a user
programmable „
HMI-Open
“ with Ethernet and USB onboard. The fieldbus
interfaces CANopen, ProfibusDP-Master/Slave or MPI are available
optionally.
With CoDeSys IEC-61131 Soft-PLC the device can be used as "
HMI-
Control
" with visualisation, integrated Soft-PLC and optionally local I/Os.
With the CoDeSys Motion-Control solution Soft-Motion the Soft-PLC can be
used as a Motion-Controller which is able to control drives from different
manufacturers within the PLC program.
An exchangeable Compact-Flash™ is used as mass storage device. Without
moving parts the devices are “at home” in rugged environment!
For fast, intuitive and fatigue free operation two approved touch-screen
technologies are available: the service free infrared touch-screen with
scratch free safety glass or the seamless resistive touch-screen.
Features:
•
WindowsCE
•
Touchscreen
•
Geode 266MHz CPU
•
Ethernet onboard
•
Exchangeable CompactFlash™
•
Profibus, MPI, CANopen (Option)
•
Soft-Motion (Option)
•
Local I/Os (Option)
The devices can be installed in control panels or control desks without any
problem. The devices are not designed for mobile use.
This device description is a reference for the technical data, installation,
terminals, commissioning, operation, and maintenance of all EthernetPanel
versions.
Additional documentation
:
System description WindowsCE
DVS 49631
System description CoDeSys Soft-PLC
DVS 49634
DVS 48961-V4.0
Summary of Contents for 50 81 332
Page 52: ...DVS 48961 V4 0...
