![background image](http://html1.mh-extra.com/html/grone-0/avensys-34-084/avensys-34-084_instructions-manual_2269678009.webp)
10
Installation
Adjustment
The temperature of the outflowing water is
factory set to 43
°
C. A temperature adjust-
ment is necessary if:
•
The maximum water temperature
measured at the outlet varies from
the factory set temperature.
•
After any maintenance operation on the
thermostatic cartridge.
For temperature adjustment please
proceed as follows:
1.Turn the shut-off handle counter-clockwise
to fully open position and open water flow.
2.Turn the temperature handle counter-
clockwise to maximum hot water
temperature.
3.Lever out cap (M), see fig. [11].
4.Unscrew screw (N).
5.Pull off temperature handle (O).
6.Check the temperature of the outflowing
water with a thermometer, see Fig. [12].
7.Push on temperature handle and adjust
temperature to 43
°
C.
Turn clockwise (to reduce temperature)
or counter-clockwise (to increase tem-
perature).
8.Pull off temperature handle (O) and
reinstall in hot water position as described
in Fig. [11] in reversed direction.
11
O
M
N
12
O
Summary of Contents for Avensys 34 084
Page 3: ...II Spare Parts 3 4...
Page 13: ...14...