Gröne Avensys 34 084, Instructions Manual

Page: 12 / 14

13
Care
Trouble Shooting
We want to ensure that you get long-lasting
satisfaction and pleasure from your GROHE
fitting. Therefore, please read the following
care instructions because damage to the
surface and underlying material resulting
from improper treatment is not covered by
our guarantee.
Do not use any abrasive sponges or scou-
ring agents for cleaning. We also advise not
to use cleaning agents containing solvent or
acid, limescale removers, household vinegar
and cleaning agents with acetic acid. They
are aggressive to the surface and will leave
your fitting dull and scratched. As the for-
mulations of commercially available cleaning
agents frequently change, we cannot gua-
rantee they will provide the gentle care our
fitting deserves.
Clean the fitting with a little soap and a moist
cloth only, then simply rinse off and wipe dry.
You can avoid lime spots by drying the fitting
each time it is used. If lime deposits do oc-
cur, remove them with
Grohclean (ref.
no. 45 939), our environment-friendly
cleaning liquid.
Grohclean is specially
formulated to gently clean the surface of our
Problem Cause Remedy
Thermostatic valve
opens through hot Hot and cold water supplies have
been connected in reverse Rotate the thermostatic mixing
valve
Range of temperature
adjustment restricted High pressure difference between
hot and cold water supply Install flow limiter see chapter
Exposed Installation
Shower insufficiently
cold or hot Adjustment incorrectly set
Hot water supply temperature too
low
Refer to the instructions in chapter
Adjustment
Check hot water source tempera-
ture setting
No flow of hot or cold
water Either the hot or cold side is not
fully pressurized
Debris caught inside the inlet of
the control unit
Replace non-return valve, refer to
chapter
Maintenance
Remove mixing valve and flush out
or remove any debris lodged in-
side the hot or cold inlets or filters
Hot water emerges to
cold water supply or
vice versa Non return valves are damaged in
cause of lime Replace non-return valve, refer to
chapter
Maintenance