Grohe 36 206, Manual

Page: 9 / 114

6
Functions for wash basin fittings
Set continuous operation time (factory setting: 3.5 min)
This function is available for products with a manufacturing
date later than 01.06.2003. On older fittings, the fitting is
switched off when the relevant buttons are pressed.
Activate continuous operation (thermal disinfection)
Turn the mixer lever or thermostat the hot water end stop.
Set automatic safety shut-off
Factory setting: 60 s
Switch automatic flushing on/off
Automatic flushing serves to ensure water hygiene in the event
of long-term non-utilisation of the fitting. After 1 to 3 days
(independent of usage) or 1 to 3 days after the last use of
the fitting (depending on usage), flushing is initiated for 1
to 10 minutes.
Ensure free draining in the case of activated
automatic flushing.
For automatic flushing of the hot and cold water
lines, the fitting must be in the mixed water setting.
This function is available for products with a manufacturing
date later than 01.05.2002. On older fittings, no flashing
signals appear in the sensor system of the fitting when the
relevant buttons are pressed.
Change flush interval of automatic flushing
Factory setting: 3 days
Function Button Indicator lamp
Initiate
TEST
Set duration OFF
AUTO
3.5 min:
11 min:
Switch by pressing button
again
Finish
TEST
or after 60 s
Function Button Indicator lamp
Activate
continuous
operation
ON
AUTO
Water runs (continuous
operation time)
End
prematurely
ON
AUTO
Function Button Indicator lamp
Initiate
RESET
Hold and
within 3 s:
OFF
AUTO
.....
Set switch off
time in stages Within 10 s: Switch off time < 60 s;
Per stage (5 s):
Switch off time > 60 s;
Per stage (60 s):
End position:
Finish Wait 10 s
Function Button Indicator lamp
Initiate
RESET
Hold and
within 3 s:
OFF
AUTO
.....
Switch on/off Within 10 s:
OFF
AUTO
Switched on:
Switched off:
Switch by pressing button
again
Finish Wait 10 s
Function Button Indicator lamp
Initiation
TEST
Set flush
interval
ON
AUTO
1 day:
3 days:
Switch by pressing button
again
Finish
TEST
or after 60 s