Grohe 36 206, Manual

Page: 10 / 114

7
Set flush duration of automatic flushing
Factory setting: 5 mins.
Switching between usage-dependent/independent
flushing
Factory setting: usage-dependent
Flushing can be set dependent on or independent of the actual
usage.
This function is available for products with a manufacturing
date later than 01.02.2009.
Functions for wash basin wall fittings
(only surface-mounted)
Changing type of detection
Factory setting: Start/stop by approaching sensor system with
the hands (3 to 7cm).
Stop additionally when person leaves the detection
zone (> 35cm).
Set detection zone
Start/stop exclusively through approaching sensor
system with the hands
The detection zone can be adapted, see Set detection zone.
Reset detection zone to factory setting
Press RESET for more than 3 seconds.
Start/stop only when a person enters and moves out of the
detection zone
The detection zone can be adapted, see Set detection zone.
Reset detection zone to factory setting
Press RESET for more than 3 seconds.
Function Button Indicator lamp
Initiation
TEST
Increase flush
duration Per stage
(1 min):
End position
(10 min):
Reduce flush
duration Per stage
(1 min):
End position
(1 min):
Finish
TEST
or after 60 s
Function Button Indicator lamp
Initiation
RESET
Hold and
within 3 s:
OFF
AUTO
.....
Switch on/off Within 10 s:
TEST
Usage-dependent:
Usage-independent:
Switch by pressing button
again
Finish Wait 10 s
Function Button Indicator lamp
Zoom area Per stage:
End position:
Reduce area Per stage:
End position:
Function Button Indicator lamp
Press until end position reached:
When end
position reached
Function Button Indicator lamp
Press until end position reached:
When end
position
reached