Grizzly T32304, Owner'S Manual, Page: 22 / 52

Figure 25. Installing sausage stuffer on meat
grinder.
Figure 24. Installing meat grinder.
Figure 26. Meat grinder installed.
Figure 23. Fence and meat pusher installed on
shafts.
x 2
-20-
Model T32304 (Mfd. Since 02/21)
22. Loosen lock handle on meat grinder, and
line up fixed key on grinder with keyway on
grinder mount (see
Figure 24).
Keyway
24. Slide meat grinder all the way on grinder
mount and tighten lock handle to secure meat
grinder in place (see
Figure 26).
Note: If meat grinder does not fully seat, it
may be necessary to spin pulley wheel by
hand so meat grinder tongue fits into groove
on auger.
Lock Handle
23. Remove collar from end of meat grinder (see
Figure 25), fit collar over sausage stuffer,
and tighten on meat grinder.
Collar
Sausage Stuffer
20. Install fence on fence shaft and secure with
(1) M6-1 x 16 cap screw (see Figure 23).
21. Install meat pusher on pusher shaft and
secure with (1) M6-1 x 16 cap screw (see
Figure 23).
Meat Pusher
Fence
Cap Screws
Fence
Shaft
Pusher
Shaft