manualshive.com logo in svg

Grizzly T28360, Owner'S Manual, Page: 8 / 40

Share
Download
Grizzly T28360 Owner'S Manual Download Page 8

-6-

Model T28360 (Mfd. Since 11/18)

Model T28360

Page 2 of 2 

Specifications:

Operation Information

Arbor Diameter ........................................................................................................................................................5/8 in.
Maximum Blade Diameter ..........................................................................................................................................7 in.
Head & Track Tilt ........................................................................................................................................... 45º Left-Tilt
Maximum Cut Length (w/Fence) ..............................................................................................................................20 in.
Maximum Cutting Thickness @ 90º .....................................................................................................................1-1/4 in. 
Maximum Cutting Thickness @ 45º .....................................................................................................................1-1/4 in.
Coolant Pump .......................................................................................................................................................27 GPH

Construction

Frame ........................................................................................................................................................................Steel
Tub ......................................................................................................................................................................... Plastic
Table ..................................................................................................................................................................Aluminum
Paint Type/Finish ......................................................................................................................................Powder Coated

Other Specifications:

Country of Origin ............................................................................................................................................................... China
Warranty ........................................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ............................................................................................................................15 min.
Serial Number Location ................................................................................................................................................ ID Label
ISO 9001 Factory ..................................................................................................................................................................Yes
ISO 9001 Factory ..................................................................................................................................................................Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................................... No

Features:

Miter Gauge
Ultra-Quiet Induction Motor
Smooth-Sliding Dual Rails
Water Pump Capacity of 27 Gallons Per Hour
Workpiece Back-Stop Clamping Plate on Table
7" Saw Blade
Comfortable Rubber Grip Handle
Drain Plug in Tub
Head and Track Tilt to 45º Left for Beveled Cuts 

Accessories Include: 

Miter Gauge
Workpiece Clamp
7" Saw Blade

Summary of Contents for T28360









































Reviews:

No comments