Grizzly T1244, Owner'S Manual

Page: 10 / 32

-8-
Model T1244 (Mfd. Since 10/17)
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 1) Qty
A. Dust Port 2
1
⁄
2
" ............................................. 1
B. Dust Port Adapter 2
1
⁄
2
"–2
1
⁄
4
" ....................... 1
C. Router Table Extension Wing w/Miter Slot . 1
D. Router Bit Guard ........................................ 1
E. Fence Bracket ............................................ 1
F. Router Mounting Plate ................................ 1
G. Fences (Infeed and Outfeed) ..................... 2
H. Fence Scales (0"–15
11
⁄
16
") ........................... 2
Hardware Bag (Figure 2)
I. Table Insert (Solid) ..................................... 1
J. Knobs 8-Lobe ............................................. 6
K. Table Insert (32mm ID) ............................... 1
L. Table Insert (37mm ID) ............................... 1
M. Knobs 3-Lobe ............................................. 2
N. Fender Washers 6mm ................................ 2
O. T-Bolts ........................................................ 2
P. Square Washers 10mm .............................. 4
Q. Hex Nuts M6-1 ........................................... 2
R. J-Hooks ...................................................... 2
S. Phillips Head Screws M5-.8 x 55 ............... 2
T. Flat Head Screws M4-.7 x 5 ....................... 3
U. Flat Head Screws M6-1 x 16 ...................... 3
V. Hex Bolts M8-1.25 x 25 .............................. 6
W. Flat Washers 8mm ..................................... 6
X. Set Screws M6-1 x 6 .................................. 4
Y. Starting Pin ................................................. 1
Z. Hex Wrench 3mm ....................................... 1
AA. Hex Bolts M10-1.5 x 40 .............................. 6
AB. Hex Bolts M8-1.25 x 40 .............................. 4
AC. Flat Washers 10mm ................................... 8
AD. Lock Washers 8mm.................................... 4
AE. Hex Nuts M8-1.25 ....................................... 4
Figure 1. T1244 inventory.
A
B
C
D
E
F
G
H
Figure 2. Hardware bag inventory.
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
X Y
Z AB
W
AC
AD AE
AA