-8-
Model H8178 Power Feed
The Model H8178 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Unpacking
Setup Safety
SECTION 3: SETUP
Items Needed for
Setup
The following items are needed to complete the
setup process, but are not included with your
machine:
Tools & Hardware Needed:
Qty
•
Wrench 10mm ............................................ 1
•
Center Punch ............................................. 1
•
Power Drill .................................................. 1
•
Drill Bit (#25) .............................................. 1
•
Bottoming Tap (#10-24) .............................. 1
•
Flat Head Screws (#10-24 x 1/2") .............. 2
•
Hex Wrench (3mm) .................................... 1
•
Hex Wrench (4mm) .................................... 1
•
Hex Wrench (5mm) .................................... 1
•
Phillips Screwdriver (#1) ............................ 1
•
Phillips Screwdriver (#2) ............................ 1
•
Flat Tip Screwdriver (#2) ............................ 1
•
Flat Metal File (10") .................................... 1
•
Small Hammer ............................................ 1
•
Dowel Punch 1/8" ....................................... 1
•
Medium Workbench Vise .......................... 1
Summary of Contents for H8178
