Grizzly G1021X2, Owner'S Manual

Page: 65 / 76

G1021X2 & G1021Z (Mfd. Since 08/16)
-63- BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
210
206
220
213
202V2
215V2
Add SAE 30 oil every 24 hours of operation.
NOTICE
219
207V2 201V2
216V2
205V2
218
217V2 209
208
MODEL G1021X2
15" SPIRAL CUTTERHEAD PLANER
Motor: 3 HP, 230V, 1-Ph, 60 Hz
Full-Load Current Rating: 15A
Cutterhead: 4 Spirals, 52 Inserts
Replacement Inserts: H9893
Cutterhead Speed: 5000 RPM
Feed Rates: 16 & 20 FPM
Max. Depth of Cut: 1/8"
Min. Stock Thickness: 3/16"
Min. Stock Length: 6"
Max. Cutting Width: 15"
Max. Cutting Height: 6"
Weight: 520 lbs.
Specifications WARNING!
Date
Mfd. for Grizzly in Taiwan
S/N
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and respirator.
3. Disconnect power before doing any service on machine.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items
that can get entangled. Tie back long hair and roll up
sleeves.
6. Do not plane two boards of varying thickness at the same
time.
7. Never plane material smaller than 6" long or
3
/
16
" thick.
8. Keep fingers clear of pinch point between stock and table.
9. Stand clear of board ends during cutting operation.
10. Inserts are sharp! Use extreme caution when servicing.
11. Never reach into cutting area while machine is running.
12. Do not expose to rain or use in wet or damp locations.
13. Prevent unauthorized use by children or untrained users.
175370
G1021X2
G1021X2 Labels & cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
201V2 P1021X2201V2 DISCONNECT POWER LABEL 213 P1021X2213 ELECTRICITY LABEL
202V2 P1021X2202V2 MACHINE ID LABEL V2.05.18 215V2 P1021X2215V2 BELT COVER WARNING LABEL V2.05.18
205V2 P1021X2205V2 SHIFT GEARBOX NOTICE V2.05.18 216V2 P1021X2216V2 ADD OIL NOTICE V2.05.18
206 P1021X2206 TOUCH-UP PAINT, GRIZZLY PUTTY 217V2 P1021X2217 MODEL NUMBER LABEL V2.05.18
207V2 P1021X2207V2 READ MANUAL LABEL 218 P1021X2218 STOP OIL FILL TAG
208 P1021X2208 TOUCH-UP PAINT, GRIZZLY GREEN 219 P1021X2219 INVENTORY SHIPPING NOTICE
209 P1021X2209 EXTREME SERIES NAMEPLATE 220 P1021X2220 EYE/EAR/LUNG INJURY LABEL
210 P1021X2210 GRIZZLY NAMEPLATE-LARGE
Safety labels help reduce the risk of serious injury caused by machine hazards. if any label comes
off or becomes unreadable, the owner of this machine MuSt replace it in the original location
before resuming operations. for replacements, contact (800) 523-4777 or www.grizzly.com.