Grizzly G0901, Owner'S Manual, Page: 6 / 56

-4-
Model G0901 (Mfd. Since 09/19)
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Operator Station & Carriage
Figure 2. Operator controls.
D E F
F
G
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Engine
Figure 1. Engine controls.
A
B
C
A. Engine Speed Lever: Regulates amount of
air entering engine, controlling engine speed.
Move halfway between SLOW (turtle) and
FAST (rabbit) when starting engine. Adjust
lever as needed for operation.
B. Engine Choke Lever: Controls choke valve
and air-to-fuel ratio in engine. Move lever
to OPEN ( ) position when starting engine
cold. Move lever to CLOSED ( ) position
after engine starts. Use CLOSED ( ) posi-
tion if starting engine warm.
C. Starter Rope: Pull several times to start
engine. Slowly retract starter once engine
starts.
D. Emergency Stop Button: Shuts off engine
when pressed. Twist stop button to reset
before restarting engine.
E. Blade Height Handwheel: Raises/lowers
saw blade. One full revolution moves blade
approximately 1", with stops at
1
⁄
16
" increments.
F. Push Handle: Moves carriage along track.
G. Throttle Handle: Increases engine speed
when squeezed. Fully engage throttle when
performing cutting operations.
H. Blade Lubricant Shutoff Valve: Starts/stops
flow of lubricant onto blade.
I. Blade Tension Handle: Increases/decreas-
es blade tension (refer to Page 23 for more
information).
H
I
Figure 3. Behind blade cover.