manualshive.com logo in svg

Grizzly G0901, Owner'S Manual, Page: 10 / 56

Share
Download
Grizzly G0901 Owner'S Manual Download Page 10

-8-

Model G0901 (Mfd. Since 09/19)

Model G0901

Page 2 of 2 

Construction

Track ................................................................................................................................................... Electroplated Steel
Frame ........................................................................................................................................................................Steel
Body ..........................................................................................................................................................................Steel
Wheels ................................................................................................................................................................ Cast Iron
Paint. ......................................................................................................................................... Powder Coated & Epoxy

Additional Information

Wheel Size ...............................................................................................................................................................19 in.
Blade Lubrication (type) .............................................................................................................. Water or Water w/Soap
Lubrication Reservoir (capacity) .........................................................................................................................1-1/4 gal.
Track Extensions ..........................................................................................................................................6 ft. Sections
Track Leveling ................................................................................................................... 4 Adjustable Feet per Section 

Other Specifications:

Country of Origin ............................................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................................... 1 Year
Sound Rating .............................................................................................................................................................90 - 92 dB
Approximate Assembly & Setup Time ................................................................................................................................1 Hr.
Serial Number Location ................................................................................................................................................ ID Label

Features:

13.5 HP Briggs & Stratton Engine
Manual Lift System Raises 1" per Revolution with 1/16 in. Stop Increments
Easy-Set Blade Tensioning
Low-to-the-Ground Bed
Adjustable Log Supports and Log Clamp
Blade Lubrication System
Easy Shipping and Assembly

Summary of Contents for G0901

























































Reviews:

No comments