Model G0895 (Mfd. Since 01/20)
-5-
Additional Components
L. Control Panel:
Controls the amount of oil
that lubricates ball screws and bearings.
M. Oil Reservoir:
Holds one quart of T27914
ISO 68 way oil. One pump lubricates ball
screws and bearings on all axes.
I.
Vacuum Valves: Each valve enables/dis-
ables vacuum to one vacuum zone. Drawings
above each valve indicate zone controlled by
corresponding valve.
Figure
4. Vacuum valves at rear of machine.
I
J.
Vacuum Plug: Keeps debris out of unused
ports. Remove plug when using port in that
vacuum zone.
K.
Vacuum Port: Holds workpiece to table
to prevent workpiece movement during
operation.
Figure
5. Vacuum port and plug.
J
K
N.
Z-Axis Tool Setter: Establishes Z-axis origin
based on surface tool setter is placed on.
O. Hand-Held Controller: Controls machine
functions.
Figure
8. Hand-held controller.
O
Figure
7. Z-axis tool setter.
N
Figure
6. Oiler components.
L
M
Summary of Contents for G0895
Page 60: ......
