Grizzly G0895, Owner'S Manual

Page: 42 / 60

-40-
Model G0895 (Mfd. Since 01/20)
Many advanced functions of the G0895 are turned
off by default. Notably, S and F letter addresses
are ignored unless intentionally turned on in the
controller.
Advanced settings are accessible through the
"AUTO PRO SETUP" menu.
Changing Advanced
Settings
Changing advanced settings will change the
default functions of your machine and how
it processes files. Changing advanced set-
tings is only recommended for experienced
operators. After changing settings, monitor
machine operation carefully to prevent dam-
age to the machine, workpiece, or cutter.
1. Press MENU, then scroll to "AUTO PRO
SETUP" and press OK.
2. Scroll to "G Code Setup" and press OK.
3. Scroll to "F Read" and press RUN/PAUSE.
"Ign F" will change to "Read F". Press OK to
save.
1. Press MENU, then scroll to "AUTO PRO
SETUP" and press OK.
2. Scroll to "G Code Setup" and press OK.
3. Scroll to "S Read" and press RUN/PAUSE.
"Ign S" will change to "Read S". Press OK to
save.
All basic controls of the G0895 are performed
through single-button commands on the control-
ler, but some advanced features require multi-
button commands to access.
Using Advanced
Controls
Advanced tool functions are accessed through the
advanced processing menu. Functions include
array work, resuming stopped jobs, surfacing a
workpiece, calculating bounds of a file, and calcu-
lating processing time of a file.
To access advanced processing menu:
1. Hold down RUN/PAUSE, press HIGH/LOW,
then release both buttons at the same time.
Advanced Processing Menu
Up to nine work coordinate systems can be saved
at a time. When work origin is set, it is set for the
active coordinate system. If the absolute coordi-
nate system is active, work origin cannot be set.
To switch coordinate systems:
1. Hold down MENU, press a single 0-9 number
button, then release both buttons at the same
time.
— Press MENU + 0 to activate absolute coor-
dinate system (mechanical coordinates).
— Press MENU + 1-9 to activate work coor-
dinate systems.
Switching Coordinate Systems
The last process run can be quickly selected to
operate again.
To repeat last process:
1. Hold down RUN/PAUSE, press 9, then
release both buttons at the same time.
Repeat Last Process
F-Code Processing
S-Code Processing