Model G0894 (Mfd. Since 05/19)
-23-
SECTION 4: OPERATIONS
To complete a typical operation, the operator
does the following:
1. Designs/writes G-code that defines toolpath.
2. Uploads G-code to USB drive.
3. Examines workpiece to make sure it is suit-
able for cutting.
4. Installs appropriate cutter for type of material
and operation.
5. If necessary, cuts workpiece to fit within
working envelope of machine.
6. Clamps workpiece securely to table.
7. Turns machine ON.
8. Homes all axes and verifies parameters (see
Page 22).
9. Connects USB drive to hand-held controller.
10. Sets work origin. Sets Z-axis relative to
workpiece or table, depending on toolpath
requirements.
11. Connects dust shoe and dust collection sys-
tem to spindle.
12. Puts on safety glasses, respirator, and hear-
ing protection.
13. Plugs in cooling pump and turns dust collec-
tion system
ON
13. Runs G-code. Spindle will automatically start
and follow toolpath.
14. When toolpath is complete, spindle will stop
and return to position defined by G-code.
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
Summary of Contents for G0894
Page 48: ......
