Grizzly G0894, Owner'S Manual

Page: 17 / 48

Model G0894 (Mfd. Since 05/19)
-15-
SECTION 3: SETUP
Description Qty
•
Forklift or hoist (rated for 1000 lbs.) ........... 1
• Safety Glasses (for each person) ............... 1
• Level ........................................................... 1
• Open-End Wrench 8mm ............................ 4
• Hex Wrench 4mm ....................................... 4
• 5-Gallon Bucket and Lid ............................. 1
• Drill ............................................................. 1
• Drill Bit
3
⁄
8
", 1" .......................................1 Ea.
• Dust Collection System .............................. 1
• Dust Hose 4" .............................................. 1
• Hose Clamps 4" ......................................... 2
• Water ...................................................4 Gal.
Needed for Setup
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
The following items are needed, but not included,
for the setup/assembly of this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Eye injury hazard! Always
wear safety glasses when
using this machine.
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
High mineral content or dirty coolant can
cause buildup and damage spindle motor.
Do not use tap water if water quality is low.