Model G0855/G0856 (Mfd. Since 02/19)
-3-
Identification
Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
For Your Own Safety Read Instruction Manual Before Operating Jointer
a) Wear eye protection.
b) Always keep cutterhead and drive guards in place and in proper operating condition. ALWAYS
replace cutterhead guard after rabbeting operations.
c) Never make jointing or rabbeting cuts deeper than
1
⁄
8
" or planing cuts deeper than
1
⁄
16
".
d) Always use hold-down or push blocks when jointing material narrower than 3" or planing
material thinner than 3".
e) Never perform jointing, planing, or rabbeting cuts on pieces shorter than 10" in length.
Infeed Table
Lock
Outfeed Table
Lock
Fence
Outfeed Table
Adjustment
Handwheel
Outfeed
Table
Depth-of-Cut
Scale
Infeed
Table
Fence Tilt Lock
4" Dust
Port
Fence Tilt
Handle
Rear Access
Panel
Fence Lock
Lever
Belt Cover
ON/STOP Switch
Mobile Base Lock Knobs
Infeed Table
Adjustment Handwheel
Infeed Depth
Stop
Cutterhead
Guard
