-16-
Model G0855/G0856 (Mfd. Since 02/19)
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Wood Crate (Figure 7)
Qty
A. Table Assembly .......................................... 1
Cardboard Box (Figure 8)
Qty
B. Stand .......................................................... 1
Loose Items (Figure 9)
Qty
C. Switch Pedestal Assembly ......................... 1
D. Lock Washers 8mm (Pedestal) .................. 2
E. Cap Screws M8-1.25 x 70 (Pedestal) ......... 2
F. Handwheels ................................................ 2
G. Lock Washers 10mm .................................. 3
H. Standoff Hex
3
⁄
8
"-16 x
3
⁄
4
x 3
5
⁄
16
" ................. 3
I. 4" Dust Port ................................................ 1
J. Flat Washers
1
⁄
4
" ......................................... 4
K. Phillips Head Screws
1
⁄
4
"-20 x
1
⁄
2
" ............... 4
L. Cutterhead Guard ....................................... 1
M. Rear Access Panel ..................................... 1
N. Push Blocks (Pair) ...................................... 2
O. Belt ............................................................. 1
P. Hex Wrenches 3, 4, 5, 6mm .................1 Ea.
Q. Open-End Wrenches 8/10, 11/13, 12/14mm
.............................................................1 Ea.
R. Knife-Setting Jig (G0855)
—External Retaining Rings .................... 4
—Knife Jig Feet ...................................... 2
—Knife Jig Rod ....................................... 1
S. Cutterhead Tools and Hardware (G0856)
—T-Handle Torx Driver T-25 ................... 2
—Torx Screws T-25 #10-32 x
1
⁄
2
" .......... 10
—Indexable Inserts 15 x 15 x 2.5mm ..... 5
Figure 8. Inventory—cardboard box.
B
Figure 9. Inventory—loose items.
O
P
Q
H
K
J
I
E
F
G
D
C
L
M
N
R
S
Figure 7. Inventory—wood crate.
A
