Grizzly G0836, Owner'S Manual

Page: 7 / 60

Model G0836 (Mfd. Since 09/17)
-5-
Headstock Controls
O. Quill Lock Screw. Use with supplied quill
lock hex wrench to secure quill in place for
increased stability during operations.
P. Spindle Depth DRO. Displays spindle travel
and depth.
Q. mm/in Button. Press to toggle Spindle Depth
DRO between inches and millimeters.
R. Spindle Depth DRO OFF/ON Button. Press
to turn Spindle Depth DRO display ON and
OFF.
S. Zero Button. Press to zero Spindle Depth
DRO anywhere along its travel.
Table Power Feed Controls
W. Direction Switch. Moves table left and right.
Center toggle position stops power feed
motor.
X. FAULT Indicator. Illuminates when power
feed encounters fault or power feed limit
switch. Reset by turning speed control dial
OFF.
Y. POWER Indicator. Glows green when power
feed is connected to power supply.
Z. Speed Control Dial. Rotate to turn power
feed ON and OFF. Varies power feed motor
speed from 100–360 FPM.
AA. Leadscrew Selector Knob. Rotate to engage
or release the power feed drive gear.
Figure 4. G0836 power feed controls.
W Y Z AA X
Figure 3. G0836 headstock controls.
U
Q
R
P
O
T
S
V
N. Z-Axis Lock Handle. Tighten to lock head-
stock in position.
T. Coarse Downfeed Handle. Pull down for
fast spindle downfeed with drilling operations;
features spring-loaded spindle return.
U. Downfeed Selector Knob. Rotate to engage
fine spindle control for milling operations.
V. Fine Downfeed Knob. Manually controls
rate of fine spindle downfeed.
Figure 2. G0836 Z-axis lock handle.
N