Grizzly G0808, Owner'S Manual

Page: 64 / 68

-62-
Model G0808 (Mfd. Since 11/15)
Labels
Fluid Capacity
Gearhead
2.64 qt.
Grizzly T26685 ISO 32 Equivalent
Component
Type
Capacity
NOTICE Do not fill gearbox beyond center of oil site glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1 (unless otherwise noted) • Labels MUST be made of chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
manuals@grizzly.com
.
REFER TO
OWNER’S MANUAL FOR OIL TYPE AND
AMOUNT
.
CHECK OIL
LEVEL BEFORE USING!
grizzly.com
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
CAUTION
PANTONE 109 C
NOTICE
PANTONE 3005 C or RAL 5005
GRIZZLY GREEN
PANTONE 568C
501
502
511
511
503
504
505
506
507
507
511
511
510
508
Do not fill gearbox
beyond center of oil site
glass below.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
g
rizzly.co
m
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
CAUTION
PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY GREEN PANTONE 568C
Fluid Capacity
Gearhead
2.64 qt. Grizzly T26685 ISO 32 Equivalent
Component Type Capacity
NOTICE
Do not fill gearbox
beyond center of oil site
glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
g
rizzly.co
m
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY GREEN PANTONE 568C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0808 Machine Labels D
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
RPM
RPM 9
8
7
6
5
4
3
2
1
0
Em
erg
ency Sto
p
COLOR CODES
CAUTION
PANTONE 109 C
G0808 Machine Labels A
(10/16/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
Power Requirement: 220 V, 1-Ph,
15A, 60 Hz
Motor: 1.5 HP, 220 V, 3-Ph, 1720 RPM
Full Load Current Rating: 5.5A
Swing: 20-3/4"
Max. Dist. Spindle-to-Table: 17-1/2"
Spindle Taper: R-8
Spindle Travel: 4-7/8"
Number of Spindle Speeds: Variable
Spindle Speed Range: 0–2500 RPM
Drilling Capacity Steel: 1-9/16" Dia.
Gearhead Fluid Capacity: 2.64 qt.
Weight: 705 lbs.
Specifications
Date
SN
Mfd. for Grizzly in Taiwan
WARNING!
MODEL G0808
VS GEARHEAD DRILL PRESS
w/CROSS-SLIDE TABLE
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, servicing, or changing bits.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent unexpected rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for each type of drill bit and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
COLOR CODES
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005 WARNING
NOTICE PANTONE 3005 C or RAL 5005
NOTICE
1. Rapid traverse. Keep area clear during use.
2. Keep dirt and foreign material out of
powerfeed.
3. Only lubricate bevel gear with graphite
grease.
4. Place handle in neutral position when
powerfeed is turned OFF.
Fluid Capacity
Gearhead 2.64 qt. Grizzly T26685 ISO 32 Equivalent
Component Type Capacity
NOTICE
Do not fill gearbox
beyond center of oil site
glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
g
rizzly.c
o
m
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
CAUTION
PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY GREEN PANTONE 568C
G0808 Machine Labels B
(10/21/15)
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
COLOR CODES
PANTONE 151 C or RAL 2005 WARNING
NOTICE PANTONE 3005 C or RAL 5005 GRIZZLY GREEN PANTONE 568C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
H
L
0–2500 RPM
0–350 RPM
Change spindle
speed or rotation
direction ONLY
when spindle is
completely
stopped.
G0808
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
H
L
1
1
0
CM IN
0
2
2
3
3
4
5
4
5
6
7
8
9
10
11
12
13
509
Fluid Capacity
Gearhead 2.64 qt. Grizzly T26685 ISO 32 Equivalent
Component Type Capacity
NOTICE
Do not fill gearbox
beyond center of oil site
glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
REFER TO
CHECK OIL
LEVEL BEFORE USING!
g
r
izzly.c
o
m
G0808 Machine Labels A
(10/16/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
Power Requirement: 220 V, 1-Ph,
15A, 60 Hz
Motor: 1.5 HP, 220 V, 3-Ph, 1720 RPM
Full Load Current Rating: 5.5A
Swing: 20-3/4"
Max. Dist. Spindle-to-Table: 17-1/2"
Spindle Taper: R-8
Spindle Travel: 4-7/8"
Number of Spindle Speeds: Variable
Spindle Speed Range: 0–2500 RPM
Drilling Capacity Steel: 1-9/16" Dia.
Gearhead Fluid Capacity: 2.64 qt.
Weight: 705 lbs.
Specifications
Date
SN
Mfd. for Grizzly in Taiwan
WARNING!
MODEL G0808
VS GEARHEAD DRILL PRESS
w/CROSS-SLIDE TABLE
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, servicing, or changing bits.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent unexpected rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for each type of drill bit and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
COLOR CODES
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005 WARNING
NOTICE PANTONE 3005 C or RAL 5005
NOTICE
1. Rapid traverse. Keep area clear during use.
2. Keep dirt and foreign material out of
powerfeed.
3. Only lubricate bevel gear with graphite
grease.
4. Place handle in neutral position when
powerfeed is turned OFF.
Fluid Capacity
Gearhead 2.64 qt. Grizzly T26685 ISO 32 Equivalent
Component Type Capacity
NOTICE
Do not fill gearbox
beyond center of oil site
glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
g
rizzly.c
o
m
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY GREEN PANTONE 568C
Fluid Capacity
Gearhead 2.64 qt. Grizzly T26685 ISO 32 Equivalent
Component Type Capacity
NOTICE
Do not fill gearbox
beyond center of oil site
glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
grizzly.c
o
m
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
CAUTION
PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY GREEN PANTONE 568C
Fluid Capacity
Gearhead 2.64 qt.
Component Capacity
NOTICE
Do not fill gearbox
beyond center of oil site
glass below.
G0808 Machine Labels C
(10/14/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
grizzly.c
o
m
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY GREEN PANTONE 568C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
Power Requirement: 220 V, 1-Ph,
15A, 60 Hz
Motor: 1.5 HP, 220 V, 3-Ph, 1720 RPM
Full Load Current Rating: 5.5A
Swing: 20-3/4"
Max. Dist. Spindle-to-Table: 17-1/2"
Spindle Taper: R-8
Spindle Travel: 4-7/8"
Number of Spindle Speeds: Variable
Spindle Speed Range: 0–2500 RPM
Drilling Capacity Steel: 1-9/16" Dia.
Gearhead Fluid Capacity: 2.64 qt.
Weight: 705 lbs.
Specifications
Date
SN
Mfd. for Grizzly in Taiwan
WARNING!
MODEL G0808
VS GEARHEAD DRILL PRESS
w/CROSS-SLIDE TABLE
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, servicing, or changing bits.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent unexpected rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for each type of drill bit and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
COLOR CODES
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005 WARNING
NOTICE PANTONE 3005 C or RAL 5005
NOTICE
1. Rapid traverse. Keep area clear during use.
2. Keep dirt and foreign material out of
powerfeed.
3. Only lubricate bevel gear with graphite
grease.
4. Place handle in neutral position when
powerfeed is turned OFF.
REF PART # DESCRIPTION REF PART # DESCRIPTION
501 P0808501 GRIZZLY NAMEPLATE 507 P0808507 RAPID TRAVERSE NOTICE
502 P0808502 GRIZZLY.COM LABEL 508 P0808508 TOUCH-UP PAINT, GRIZZLY BEIGE
503 P0808503 MACHINE ID LABEL 509 P0808509 FACEPLATE/WARNING COMBO LABEL
504 P0808504 FLUID CAPACITY LABEL 510 P0808510 CONTROL PANEL LABEL
505 P0808505 GEARBOX FILL NOTICE 511 P0808511 ELECTRICITY LABEL
506 P0808506 STOP CHECK OIL TAG
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.