Grizzly G0783, Owner'S Manual, Page: 18 / 48

-16-
G0783 (Mfd. Since 05/15)
3. Remove temporary headstock plug (see
Page 16).
Figure 11. Removing temporary headstock plug.
Temporary
Headstock
Plug
4. Thread lever arm several turns into headstock
until trigger button cord is on top of lever arm,
then use adjustable wrench to tighten hex nut
against headstock (see
Figure 12).
5. Connect trigger button cord to right side
of control box (see Figure 12) and tighten
knurled knob.
Figure 13. Handle installed on lock lever.
Lever
Cap
Figure 12. Lever arm and button cord installed.
Hex Nut
Lever
Arm
Trigger
Button
Cord
Oil Sight Glass
6. Thread lever cap onto lock lever (see
Figure 13).
7. Install blade (refer to Changing Blade on
Page 20 for blade installation).