Model G0776 (Mfd. Since 7/14)
-5-
Controls &
Components
Headstock
A. Spindle Speed Range Lever: Selects
between high and low spindle speed ranges.
B. Spindle Speed Lever: Selects one of four
different spindle speeds within the selected
speed range.
C. Headstock Feed Direction Lever: Controls
rotation direction of leadscrew and feed rod.
D. Thread and Feed Chart: Shows how to
arrange gearbox controls for different thread-
ing or feeding options.
E. Quick-Change Gearbox Levers and Dial:
Controls leadscrew and feed rod speed for
threading and feeding operations.
Figure 2. Headstock controls and components.
B
E
C
A
D
Refer to
Figures 1–8 and the following descrip-
tions to become familiar with the basic controls of
this lathe.
Many of the controls will be explained in greater
detail later in this manual.
Main Power Switch
The rotary switch shown in
Figure 1 toggles
incoming power ON and OFF to the lathe controls.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. Location of the main power switch.
Main Power
Switch
