Model G0764Z (Mfd. Since 10/15)
-49-
Changing Speed
The Model G0764Z has three main blade
speeds—3000, 4000, and 5000 RPM. These
speeds are selected by repositioning the main
motor belts on the pulleys.
Items Needed
Qty
Wrench 22mm ................................................... 1
To change main blade speed:
1. DISCONNECT MACHINE FROM POWER!
2. Open motor cabinet door and locate motor
adjustment lever shown in
Figure 86.
Arbor
Pulley
Motor
Pulley
3000
4000
5000
Figure 87. Belt positions for each speed.
Figure 86. Location of main motor adjustment
lever.
3. Rotate motor adjustment lever counterclock-
wise to release belt tension.
4. Inspect the belt. If there is any evidence of
damage or excessive wear, replace it.
5. Position belt on correct arbor and motor pul-
ley set for desired speed (refer to
Figure 87
for pulley identification).
6. Rotate motor adjustment lever clockwise to
retension belt.
7. Close motor cabinet door before reconnect-
ing machine to power.
Adjustment
Lever
Summary of Contents for G0764Z
Page 21: ...Model G0764Z Mfd Since 10 15 19 5mm Hardware Recognition Chart ...
Page 118: ......
