Model G0727 (Mfg. Since 7/11)
-15-
Mounting
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
to move heavy items.
The base of this mill has four
3
⁄
8
"-16 threaded
mounting holes that accept the included adjust-
able feet or can be used with other fasteners to
secure the machine to a workbench.
We recommend permanently securing the mill to
a workbench or other suitable mounting surface
to prevent unexpected shifting during operation,
which could result in severe injury or machine
damage. Two permanent mounting options are
presented below.
The strongest mounting option is a "Through
Mount" (see example in
Figure 6) where holes
are drilled all the way through the workbench—
and hex bolts, washers, and hex nuts are used to
secure the machine in place.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure 6. Example of a "Through Mount" setup.
Another option is a "Direct Mount" (see example
in
Figure 7) where the machine is secured direct-
ly to the workbench with lag screws and washers.
Figure 7. Example of a "Direct Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Power Connection
After you have completed all previous setup
instructions and circuit requirements, the machine
is ready to be connected to the power supply.
To avoid unexpected startups or property dam-
age, use the following steps whenever connecting
or disconnecting the machine.
Connecting Power
1. To prevent an unexpected startup, press the
STOP button on the side of the control box
(see
Figure 8) to ensure the master power
switch is
OFF.
Figure 8. STOP button.
Stop
Button
Summary of Contents for G0727
Page 48: ......