Model G0686 (Mfd. Since 01/15)
-29-
Lubrication
Pivot Rod
Pull up on the pivot rod to remove it from the pivot
base, then use a shop rag and mineral spirits to
clean away the grease and grime from the rod
slot and the pivot points (see
Figure 36). Apply a
small amount of multi-purpose grease to each of
the pivot points.
Leadscrew & Slides
Remove the front panels of the pivot base and car-
riage to access the slides and carriage leadscrew
(see
Figure 37), then use a shop rag, clean
brush, and mineral spirits to clean away the
grease and grime from the slides and leadscrew.
Apply a small amount of multi-purpose grease to
the slides and leadscrew, then move the devices
through their full range of motion to distribute the
lubricant.
Figure 36. Pivot rod lubrication.
Rod Slot
Pivot Points
Figure 37. Leadscrew and slide lubrication.
Leadscrew
Slides
Summary of Contents for G0686
Page 41: ......
Page 44: ...REVISED ...
