Grizzly G0686, Owner'S Manual

Page: 30 / 44

-28-
Model G0686 (Mfd. Since 01/15)
SECTION 6: MAINTENANCE
When the wall of the wheel becomes too thin and
begins to chip during operation, use a diamond
dresser to remove the bevel on the front edge of
the wheel.
Wheel Dressing
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
• Worn or damaged grinding wheel.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance
•
Lubricate pivot handle.
• Lubricate leadscrew and slides.
• Clean/vacuum dust buildup.
• Lubricate leadscrew and slides.
• Check grinding wheel for loading up.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning &
Protecting
Cleaning the Model G0686 is relatively easy.
Vacuum excess debris, and wipe off the remaining
dust with a dry cloth.
Grinding wheels can be easily damaged, so it is
important to store them properly. Follow all wheel
manufacturer storage instructions. Always store
grinding wheels in a location that is dry and pro-
tected from potential damage due to them being
dropped or having other items dropped on them.
Also, avoid storing grinding wheels where there is
high humidity, extreme heat or cold, or solvents.
Wheel Storage
Replacement Bulb .......................... P0686002V2
To remove the bulb, gently pull it straight out of
the housing.
Insert the new bulb by gently pressing it into the
housing until it is fully seated.
Replacing Light Bulb