Grizzly G0686, Owner'S Manual

Page: 14 / 44

-12-
Model G0686 (Mfd. Since 01/15)
SECTION 3: SETUP
This machine and its com-
ponents are very heavy.
Get lifting help and use
safe lifting and moving
methods when handling
heavy machinery.
Inventory
Figure 5. Model G0686 loose inventory.
B
C
D
E
F
G
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
The following items are needed, but not included,
for the setup/assembly of this machine.
Description Qty
•
Additional People ....................................... 1
• Safety Glasses ........................................... 1
• Hex Wrench 5mm ....................................... 1
• Cleaner/Degreaser ..................... As Needed
• Disposable Shop Rags ............... As Needed
Needed for Setup
Box 1 (Figure 5) Qty
A. G0686 Grinder (Not Shown)....................... 1
B. Bit Carrier & Tailstock Assembly ................ 1
C. Combo Wrenches 8/10, 14/17mm .....1 Each
D. Small Grinding Wheels 60-Grit .................. 2
E. Extra-Large Grinding Wheels 60-Grit ........ 2
F. Handwheel Handle & Cap Screw ......1 Each
G. T-Handle Hex Wrench 3mm ....................... 1