Grizzly G0634Z insert, Manual

Page: 18 / 92

-4-
Model G0634Z/G0634XP (Mfd. Since 01/20)
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Note: The controls and components in this sec-
tion are the same for both models G0634Z and
G0634XP, unless otherwise noted.
Jointer Table Adjustment Controls
D. Infeed Table Height Adjustment Knob:
Adjusts position of jointer infeed table (when
infeed table height lock is loosened).
E. Infeed Table Height Lock:
Secures infeed
table height adjustment (requires 6mm hex
wrench).
Figure 2.
Location of infeed jointer table
adjustment controls (G0634XP shown).
Figure 3.
Location of outfeed jointer table
adjustment controls (G0634XP shown).
F
G
F. Outfeed Table Height Adjustment Knob:
Adjusts position of jointer outfeed table (when
outfeed table height lock is loosened).
G. Outfeed Table Height Lock:
Secures
outfeed table height adjustment (requires
6mm hex wrench).
Power Controls
A. Emergency Stop Button:
Stops motor when
pressed. Remains depressed until manually
reset. Reset by twisting button clockwise until
it springs outward.
B. On Button:
Starts motor. (Only if Emergency
Stop button is not in depressed position).
C. Off Button:
Stops motor when pressed.
Figure 1.
Locations of Start Button, Off Button,
and Emergency Stop/Reset Button.
B
C
A
E
D