G0604 6" X 56" Jointer
-13-
Figure 4.
Model G0604 overhead view
dimensions.
Machine Placement
Consider the jointer dimensions and size of mate-
rial to be processed through each machine, and
space for auxiliary stands, work tables or other
machinery when establishing a location for your
jointer. See
Figure 4
for the Model G0604 over-
head view dimensions.
The unpainted cast iron surfaces are coated with
a waxy oil to protect them from corrosion during
shipment. Remove this protective coating with a
solvent cleaner or citrus-based degreaser such
as Grizzly’s G7895 Degreaser. To clean thor-
oughly, some parts may need to be removed.
For
optimum performance from your machine,
make sure you clean all moving parts or slid-
ing contact surfaces that are coated.
Avoid
chlorine-based solvents, such as acetone or
brake parts cleaner, as they may damage painted
surfaces should they come in contact.
Site Considerations
Cleanup
55
1
⁄
2
"
25"
Components and Hardware Needed:
Qty
Wheel Assembly ................................................ 1
Stand Assembly w/Motor ................................... 1
Hex Bolt M8-1.25 x 50 ....................................... 1
Flat Washer 8mm .............................................. 1
Hex Bolts M10-1.5 x 55 ..................................... 2
Flat Washers 10mm .......................................... 2
Hex Nuts M10-1.5 ............................................. 2
To attach the wheel:
1.
Carefully lay the stand on its side so you can
access the underside.
2.
Bolt the wheel assembly to the stand with the
provided hardware as shown in
Figure 5
.
Wheel Assembly
Figure 5
. Bolting the wheel assembly to the
stand.
3.
Turn the stand rightside up.
Summary of Contents for G0604
