Grizzly G0604, Owner'S Manual

Page: 23 / 56

G0604 6" X 56" Jointer
-21-
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Basic Controls
This section covers the basic controls used during
routine operations.
START & STOP Buttons ( Figure 21 )
Figure 21.
START/STOP button locations.
Table Movement:
To move the infeed table,
loosen the table lock ( Figure 22 ), move the table
with the table lever in the preset range, then
tighten the table lock. The outfeed table is preset
with no range of movement allowed, so if it gets
accidentally unlocked it will not move. To adjust
the preset range of movement, refer to
SECTION
7: SERVICE about setting table heights.
Figure 22. Table control locations.
Table
Lever Table
Lever
Table
Locks
STOP
Button
START
Button
Lock the mobile base wheel before operat-
ing the jointer! Operating the jointer with the
wheel unlocked may cause loss of control,
resulting in serious personal injury.