Grizzly G0580, Owner'S Manual, Page: 21 / 64

Model G0580 (Mfd. Since 11/06)
-19-
Components and Hardware Needed: Qty
Upper Guide Assembly ..................................... 1
Lower Guide Assembly ..................................... 1
Blade Guard ...................................................... 1
Lower Guard ...................................................... 1
Hex Bolts M6-1 x 20 .......................................... 2
Hex Bolts M6-1 x 10 .......................................... 2
Hex Bolt M6-1 x 16 ............................................ 1
Flat Washers 6mm x 16mm .............................. 2
Flat Washers 6mm x 13mm .............................. 2
Tools Needed: Qty
Wrench 10mm ....................................................1
To install the lower blade guide:
1. Align and place the lower guard onto the
body.
2. Align and place the lower guide assembly
onto the lower guard, and secure with the
M6-1 x 20 hex bolts and 6mm flat washers,
as shown in
Figure 15.
Installing Blade
Guides
Figure 15. Installing lower blade guide
assembly.
Lower
Guard
Lower Guide
Assembly
To install the upper blade guide assembly:
1. Slide the upper guide assembly onto the
guide post until the bottom of the guide post
is flush with the bottom of the blade guide
post housing, and secure with an M6-1 x 16
hex bolt, as shown in
Figure 16.
Guide
Post
Guide Post
Housing
Figure 16. Installing upper blade guide.
2. Attach the upper guard to the upper guide
assembly with the M6-1 x 10 hex nuts and
6mm flat washers, as shown in
Figure 17.
Figure 17. Installing upper blade guard.
Upper Blade
Guard