Grizzly G0555XH, Owner'S Manual, Page: 24 / 72

-22-
Model G0555XH (Mfd. Since 1/18)
16. Thread (1) M8-1.25 hex nut onto lock lever,
install lock lever onto fence base, then tighten
hex nut to secure lock lever to fence base
(see
Figure 23).
17. Install fence lock lever onto fence base with
(1) 8mm flat washer, and thread into fence
base guide plate (see
Figure 24).
18. Place fence base on fence rail with fence lock
lever raised up. Push fence lock lever down
to secure fence in place (see
Figure 25).
Figure 25. Fence base installed on fence rail.
Figure 24. Fence lock lever and guide plate
installed.
Fence Base
Rail
Fence Base
Guide Plate
Fence Lock
Lever
Fence Lock
Lever in Down
(Locked)
Position
19. Mount fence to fence base, sliding T-channel
(see Figures 26–27) over fence base guide
plate (see
Figure 24) then rotate fence lock
lever to secure.
— For normal cutting operations, mount fence
in vertical position, as shown in
Figure 26.
— For cutting narrow workpieces, mount
fence in horizontal position, as shown in
Figure 27.
Figure 23. Lock lever installed in fence base.
Fence
Base
Fence
Lock
Lever
Figure 27. Fence installed in horizontal position.
T-Channel
Fence Lock
Lever
Fence
Figure 26. Fence installed in vertical position.
Fence Face
T-Channel
Fence Lock
Lever