Grizzly G0555XH, Owner'S Manual, Page: 15 / 72

Model G0555XH (Mfd. Since 1/18)
-13-
Extension Cords Work Lamp
We do not recommend using an extension cord
with this machine. If you must use an extension
cord, only use it if absolutely necessary and only
on a temporary basis.
Extension cords cause voltage drop, which can
damage electrical components and shorten motor
life. Voltage drop increases as the extension cord
size gets longer and the gauge size gets smaller
(higher gauge numbers indicate smaller sizes).
Any extension cord used with this machine must
be in good condition and contain a ground wire
and matching plug/receptacle. Additionally, it must
meet the following size requirements:
Minimum Gauge Size ...........................14 AWG
Maximum Length (Shorter is Better).......50 ft.
The work lamp is only
designed to safely operate
with 110V power. Always
disconnect the work lamp
from power and wait for the
light bulb to cool before
replacing the bulb.
The work lamp included with this machine is not
part of the electrical wiring of the machine. The
lamp must be connected to a separate grounded
120V circuit that accepts the included 5-15 plug.
Use only a replacement light bulb that is rated
40 watts or below. When changing the light bulb,
always disconnect the lamp from power and wait
for the bulb to cool.