Grizzly G0555LX, Owner'S Manual

Page: 15 / 68

Model G0555LX (Mfd. Since 1/14)
-13-
Inventory (see Figure 5) Qty
A. Table Assembly .......................................... 1
B. Bandsaw Body ........................................... 1
C. Saw Blade 93
1
⁄
2
" x
3
⁄
8
" x 6 TPI ................... 1
D. Miter Gauge Assembly ............................... 1
E. Front Fence Rail ......................................... 1
F. Rear Fence Rail ......................................... 1
G. Fence Assembly ......................................... 1
H. Upper Stand Braces ................................... 2
I. Stand Top ................................................... 1
J. Stand Sides ................................................ 2
K. Lower Stand Braces ................................... 2
L. Hardware (not shown)
—Table Insert w/Large Slot ........................ 1
—Hex Bolts
5
⁄
16
"-18 x 1
1
⁄
2
" (Bandsaw) ........ 4
—Hex Nuts
5
⁄
16
"-18 (Bandsaw) ................... 4
—Lock Washers
5
⁄
16
" (Bandsaw) ................ 4
—Flat Washers
5
⁄
16
" (Bandsaw) .................. 8
—Cap Screws
1
⁄
4
"-20 x
5
⁄
8
" (Fence) ............ 2
—Hex Bolts
1
⁄
4
"-20 x
3
⁄
4
" (Fence) ................ 2
—Flat Washers
1
⁄
4
" (Fence) ........................ 2
—Hex Bolts
1
⁄
4
"-20 x
5
⁄
8
" (Stand) .............. 16
—Flat Washers
1
⁄
4
" (Stand)....................... 16
—Flange Nuts
1
⁄
4
"-20 (Stand) ................... 16
—Stand Feet
3
⁄
8
"-16 x 2" (Stand) ................ 4
—Carriage Bolts
5
⁄
16
"-18 x
5
⁄
8
" (Stand) ........ 8
—Flange Nuts
5
⁄
16
"-18 (Stand) .................... 8
—Hex Nuts
3
⁄
8
"-16 (Stand Feet) .................. 8
—Flat Washer
3
⁄
8
" (Stand Feet) .................. 8
—Open-End Wrench 10 x 12mm ............... 1
—Hex Wrench 5mm ................................... 1
—Switch Padlock w/Keys ........................... 1
—Eccentrics
1
⁄
4
" .......................................... 2
—Quick-Release Lever .............................. 1
C
J
Figure 5. Main components inventory.
B
K
A
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
D
E
F
G
H
I