G0530 Variable Speed Buffer
-9-
The arbor shafts are coated with a wax or oil to
prevent rusting during shipment. Clean all coated
parts with a solvent cleaner or citrus-based
degreaser such as Grizzly’s G7895 Degreaser.
Avoid chlorine-based solvents as they may dam-
age painted surfaces should they come in con-
tact.
Gasoline and petroleum
products have low flash
points and could explode
if used to clean machin-
ery. DO NOT use gasoline
or petroleum products to
clean the machinery.
Smoking near solvents
could ignite an explosion
or fire and cause serious
injury. DO NOT smoke
while using solvents.
Lack of ventilation while
using solvents could
cause serious person-
al health risks, fire, or
environmental hazards.
Always work in a well
ventilated area to pre-
vent the accumulation
of dangerous fumes.
Supply the work area
with a constant source
of fresh air.
Unsupervised children and
visitors inside your shop
could receive serious per-
sonal injury. Ensure child
and visitor safety by keep-
ing all entrances to the
shop locked at all times.
DO NOT allow unsuper-
vised children or visitors
in the shop at any time.
Weight Load
The Model G0530 weighs approximately 275 lbs.
Most shop floors should be sufficient to carry the
weight of the machine. Reinforce the floor if you
question its ability to support the weight.
Working Clearance
Working clearances can be thought of as the
distances between machines and obstacles that
allow safe operation of every machine with-
out limitation. Consider existing and anticipated
machine needs, size of material to be processed
through each machine, and space for auxiliary
stands or work tables. Also, consider the relative
position of each machine to one another for effi-
cient material handling.
Lighting and Outlets
Lighting should be bright enough to eliminate
shadow and prevent eye strain. Electrical circuits
should be dedicated or large enough to handle
the amperage draw. Outlets should be located
near each machine so power or extension cords
are clear of high-traffic areas. Observe local elec-
trical codes for proper installation of new lighting,
outlets, or circuits.
Site Considerations
Clean Up
Summary of Contents for G0530
Page 18: ...16 G0530 Variable Speed Buffer...