Grizzly G0508, Owner'S Manual

Page: 14 / 45

G0508 10 HP Industrial Dust Collector
-11-
Inventory
After all the parts have been removed from the
two boxes, you should have the following items:
Contents (Figure 2–4) Qty
A.
Main Housing with Motor ............................ 1
B. Inlet ............................................................. 1
C.
Collectors ................................................... 4
D. Supporting Legs ......................................... 4
E.
Base ........................................................... 1
F. Hanger Supports ........................................ 4
G.
Hangers ...................................................... 4
H. Upper Filter Bags (fabric) ........................... 4
I.
Lower Collection Bags (plastic) .................. 4
J. Casters ....................................................... 4
K.
Rubber Gaskets ......................................... 4
L. Bag Clamps ................................................ 8
M.
Hardware Bag (not shown) ......................... 1
— Combo Wrench 10/12mm ...................... 1
— Phillips Head Screw M6-1.0 x 10 ........... 1
— Flange Bolts
1
⁄
4
"-20 x
1
⁄
2
" ...................... 12
— Flange Bolts
5
⁄
16
"-18 x
1
⁄
2
" ..................... 32
— Flat Washers
5
⁄
16
" ................................. 64
— Hex Bolts
5
⁄
16
"-18 x 1" ........................... 32
— Hex Nuts
5
⁄
16
"-18 .................................. 32
Figure 2. Model G0508 Inventory (A–D).
In the event that any nonproprietary parts are
missing (e.g., a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners listed in the inven-
tory may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
A
B
C
D
E
F
G
H
I
Figure 3. Model G0508 Inventory (E–I).
J
K
L
Figure 4. Model G0508 Inventory (J–L).