Grizzly ERM 1435 G, Instructions For Use Manual

Page: 29 / 148

29
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment
does not start
Power is off
Check the socket, cable, wire and
plug and have any repairs carried out
by an electrician
Defective start lever (
18) or release button
( 17)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Choose a lower cutting height
Motor stops
Blockage by foreign
object
Remove the foreign object
Result unsatis-
factory or mo-
tor labours
Cut height too low Set a higher cut height
Blade (
25) blunt
Have the blade sharpened or re-
place it
Blade ( 25) area
blocked
Clean the equipment
Blade ( 25) assem-
bled incorrectly
Install the blade correctly
Blade fails to
turn
Blade ( 25) blocked
by grass
Remove the grass
Blade screw ( 26)
loose
Tighten the blade screw
Strange nois-
es, rattling or
vibrations
Blade screw ( 26)
loose
Tighten the blade screw
Blade ( 25) dam-
aged
Replace the blade
Replacement parts/Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre (see “Grizzly Ser-
cice-Center”). Please have the order number mentioned below ready.
Spare blade ....................................................................................................... 13700211