Grizzly EASY FEEDER, Owner'S Manual

Page: 6 / 44

-4-
Model G0826 (Mfd. Since 01/17)
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
A. Motor Start/Speed Dial: Starts and stops
motor and controls feed rate from 7–72 FPM.
To start motor, press dial until it beeps and
control panel glows red. To stop motor, press
dial again. To adjust feed rate, press SET
button, then rotate dial clockwise to increase
feed rate or counterclockwise to decrease
feed rate.
Variable-Speed Control Panel
Figure 1. Variable-speed control panel features.
B
C
D
A
F
B. Forward Feed Direction Button ( ):
Selects forward feed direction. When pressed,
green light above button illuminates, indicat-
ing button is selected. To change feed direc-
tion, press feed direction button opposite of
currently selected feed direction twice (2X).
New feed direction will be set at lowest speed
(7 FPM). Press motor start/speed dial twice
to restore original feed rate.
C. SET Button: Enables changes to feed rate.
When pressed, selected feed rate flashes on
control panel for 10 seconds, during which
time feed rate can be selected with motor
start/speed dial. When panel stops flash-
ing, feed rate is locked—until SET button is
pressed again.
D. Reverse Feed Direction Button ( ):
Selects reverse feed direction. Green light
below button illuminates, indicating button is
selected.
E. ON/OFF Switch: When pressed, enables or
disables power.
F. Variable-Speed Readout: Displays feed rate
in FPM.
E