Model G0826 (Mfd. Since 01/17)
-29-
Chain & Sprockets
Lube Type ............. T26419 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
To prevent rust and binding, brush the sprockets
and chains (see
Figure 39) with a light film of
NLGI#2 grease. It will be necessary to remove the
chain cover to access the chain and sprockets.
Overarm Rack
Lube Type ............. T26419 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Clean the overarm rack teeth (see
Figure 42) with
mineral spirits, shop rags, and a brush. When dry,
use a brush to apply a thin coat of grease to the
teeth, then move overarm back and forth several
times to distribute the grease.
Lock Levers
Lube Type ........................... ISO 32 or Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
To prevent rust and binding, periodically clean
and oil all lock-lever and leadscrew threads
(see
Figure 41) with light machine oil.
Figure 39. Location of chain and sprockets
(chain cover removed).
Figure 41. Location of levers to lubricate.
Vertical Travel Leadscrew
Lube Type ............. T26419 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Use mineral spirits to clean any debris and built-
up grime from the vertical travel leadscrew shown
in
Figure 40, then wipe it dry. Brush a thin coat
of lubricant on the threads of the leadscrew, then
rotate leadscrew through its full path to distribute
the grease.
Figure 40. Vertical travel leadscrew.
Vertical
Travel
Leadscrew
Figure 42. Overarm rack.
Sprockets
Chains
Overarm Rack
Summary of Contents for EASY FEEDER
Page 44: ......
