Grizzly Tools BRM 46-144 A-OHV, Translation Of The Original Instructions For Use

Page: 80 / 200

80
GB
6 Impact protection
protect the operator from parts
that are flung out and from ac -
cidentally touching the blades
when mowing with no grass col-
lection box.
13 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust
14 Lateral ejection with impact
protection
prevents the lateral ejection of
lawn cuttings and solid parts
and strings up the lawn cuttings
from the side.
Technical data
Petrol Lawn
Mower ...........BRM 46-144 A-OHV Q-360°
Performance .......................2,2 KW (3 PS)
Engine .............................. RATO RV145-S
Engine size ................................144,3 cm
3
Blade rotation speed n
0
............ 2900 min
-1
Blade torque .......................... max. 45 Nm
Petrol tank volume ..........................800 ml
Octane rating ....................................95-98
Engine oil tank volume ...................500 ml
Motoroil .................. HD SAE 30 or 10W-30
Spark plug ....................... TORCH F5RTC
Cutting width .................................460 mm
Cutting height ..............6-steps, 25-75 mm
Grass collection box volume................50 l
Weight ...........................................23,5 kg
Sound pressure level
(L
pA
) ..................... 83,8 dB (A), K
pA
=3 dB
Sound power level (L
WA
)
measured ....... 94,4dB (A); K
WA
=1,17 dB
guaranteed ...............................96 dB(A)
Vibration (a
h
) at the handle
.......................... 7,629 m/s
2
; K=1,5 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra -
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer -
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.