background image

6.0 TECHNICAL INFORMATION

7.0 SPARE PARTS

All components for the KALEIDO are available. 
The exploded diagram and the catalogue are available on request.

Important information for the correct recycle/treatment procedures of this equipment

16

                                KALEIDO MSD 575 W

Size

L490 x P365 x H535

mm

Size with 4-leaf barndoor

L490 x P500 x H535

mm

Weight

24

Kg

Body

Aluminium and galvanised steel body

Operating Voltage

230

V

Operating Frequence

50/60

Hz

Operating Amperage

3,5

A

Power Absorbed

800

VA

Suggested Lamp

MSD 575 W

Socket GX 9,5

Optic Sistem

  Optic system with planar mirrors (patented)

Lamp Fuse

6x30 250V 10A

Electtronic System fuse

5x20 250V 3,25A

Max Working T emperature

130

°C

Max Ambient T emperature

40

°C

The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE), requires that old lighting fixtures must not be disposed of the normal unsor-
ted municipal waste stream. Old appliances must be collected separately in order to
optimise the recovery and recycling of the materials they contain and reduce the
impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obliga-
tion, that when you dispose of the appliance it the must be separately collected.
Consumer should contact their local authority or retailer for information conceming
the correct disposal of their old appliance.

Summary of Contents for KALEIDO GR 0410 MSD 575 W





















Reviews: